Click to enlarge

BJC-5000 printer Service Manual

CONTENT

Part 1: Safety and Precautions
1. SAFETY PRECAUTIONS
1.1 Moving Parts
1.2 Ink Stains
1.2.1 Ink path
1.2.2 Ink mist
1.3 BJ Cartridge Heat-Up
2. MACHINE PRECAUTIONS
2.1 Handling BJ Cartridges
2.1.1 Unpacking the BJ cartridge
2.1.2 Preventing clogged nozzles
2.1.3 Power on/off
2.1.4 When not using the printer
2.1.5 Ink electroconductivity
2.2 Handling Ink Cartridges (Color BJ Cartridge)
2.2.1 Unpacking the ink cartridge
2.2.2 Protecting the ink cartridge
2.3 Printer Precautions
2.3.1 Preventing deformation of the spur tip
2.3.2 Static electricity damage prevention
2.3.3 Ink leakage prevention
3. MAINTENANCE SERVICE PRECAUTIONS
3.1 EEPROM Data Precautions
3.2 Static Electricity Precautions
3.3 Disassembly and Assembly Precautions
3.4 Built-In Self-Diagnosis

Part 2: Product Specifications
1. PRODUCT OUTLINE
1.1 Product Outline
1.2 Features
1.3 BJ Cartridge
1.3.1 Color BJ cartridge (BC-21e)
1.3.2 Black BJ cartridge (BC-23)
1.3.3 Black BJ cartridge (BC-20) (reference)
1.3.4 Photo BJ cartridge (BC-22e Photo)
1.4 Dual Cartridge System
1.5 BJ Cartridge Container
1.6 Consumables
1.6.1 BJ cartridge (Black, Color, Photo)
1.6.2 Ink cartridge (BC-21e Color BJ Cartridge only)
2. SPECIFICATIONS
2.1 Printer Specifications
2.2 Paper Specifications
2.2.1 Paper size
2.2.2 Paper type
2.2.3 Cut sheet feeder sheet loading capacity
2.2.4 Printing area
2.3 Interface Specifications

Part 3: Operating Instructions
1. PRINTER SETUP
1.1 Unpacking and Inspection
1.2 Site Selection
1.3 Setup Procedure
1.3.1 Connecting the interface cable
1.3.2 Connecting the AC power cord
1.3.3 Turning on the printer
1.3.4 Installing the BJ cartridge
1.3.5 Replacing the ink cartridge
1.3.6 BJ cartridge container
1.4 Turning the Printer On/Off
1.4.1 Turning the printer on
1.4.2 Turning the printer off
1.5 Paper Settings
1.6 Banner Print
1.7 Names of Parts and Their Functions
2. TRANSPORTING THE PRINTER
2.1 Carrying the Printer
2.2 Transporting the Printer
3. PRINTER SERVICING FUNCTION
3.1 Error Indications
3.2 Cleaning the BJ Cartridge
3.3 Self-Test Printout
3.4 Service Mode
3.5 Service Mode Print Sample
3.5.1 Ripple pattern
3.5.2 Service information printing

Part 4: Technical Reference
1. OVERVIEW
1.1 Printer Block Diagram
1.2 Initialization Sequence Flowchart
1.3 Print Signal Flow
1.3.1 Data between host computer and printer
1.3.2 Print signal flow in the printer
1.4 Print Drive
1.4.1 Print drive control
1.5 Power-Off Sequence Flowchart
2. FIRMWARE
2.1 Interface
2.1.1 Compatible mode
2.1.2 Nibble mode
2.1.3 ECP mode
2.2 Printing System
2.3 Printing Modes
2.3.1 Printing mode
2.3.2 Photo print mode
2.3.3 Multi-drop print mode
2.4 Cartridge Automatic Adjustment Function
2.4.1 Automatic correction of head nozzle alignment
2.4.2 Automatic density correction of left/right cartridge
2.5 Data Separation Function
2.6 Ink Smear Control
2.7 Head Overheating Protection Control
2.8 Auto Power-Off
3. PRINTER MECHANICAL SYSTEM
3.1 Overview
3.1.1 Mechanical components
3.2 BJ Cartridge
3.2.1 Black BJ cartridge structure
3.2.2 Color BJ cartridge structure
3.2.3 Photo BJ cartridge structure
3.2.4 Bubble head unit structure
3.3 Purge Unit
3.3.1 Purge unit functions
3.3.2 Purge unit structure
3.4 Carriage
3.4.1 Carriage function
3.4.2 Carriage structure
3.5 Paper Feed/Cut Sheet Feeder
3.5.1 Paper feed/cut sheet feeder function
3.5.2 Sheet feeder structure
4. PRINTER ELECTRICAL SYSTEM
4.1 Overview of Printer Electrical System
4.2 Logic Section
4.2.1 Logic section block diagram
4.2.2 Logic section components
5. SENSOR FUNCTIONS
5.1 Pick-Up Roller Sensor
5.2 Paper End Sensor
5.3 Home Position Sensor
5.4 Purge Sensor
5.5 Cover Open Sensor
5.6 Printer Temperature Sensor
5.7 Head Temperature Sensor
5.8 Auto-Alignment Sensor
5.9 Waste Ink Amount Detection

Part 5: Maintenance
1. Maintenance
1.1 Parts for Regular Replacement
1.2 Consumables
1.3 Periodic Maintenance
2. SERVICE TOOLS
2.1 List of Tools
3. GREASE APPLICATION
4. DISASSEMBLY AND REASSEMBLY
4.1 Disassembly and Reassembly
4.2 Disassembly and Reassembly Cautions
4.2.1 Fastening screws of idler pulley assembly
4.2.2 Carriage guide frame installation
4.2.3 Unlocking the carriage lock
4.3 Logic Board and Waste Ink Absorber Replacement Cautions
4.3.1 Logic board replacement cautions
4.3.2 Cautions after replacing the waste ink absorber
5. ADJUSTMENTS
5.1 Adjustment Point
5.2 When Adjustment is Required
5.2.1 Tools required for adjustment
5.3 Adjustment Procedure
5.3.1 Preparation
5.3.2 Adjustment
6. TROUBLESHOOTING
6.1 Troubleshooting
6.1.1 Overview
6.1.2 Troubleshooting cautions
6.2 Error Condition Diagnostics
6.2.1 Diagnostic flowcharts
6.2.2 Error recovery
7. LOCATION AND SIGNAL ASSIGNMENT
7.1 Logic Board
8. CIRCUIT DIAGRAMS
8.1 Parts Layout
8.1.1 Logic board
8.2 Circuit Diagrams

FORMAT: High resolution PDF document!
ZIP archive: 2 780 kB

I want to:	Download on-line

Any questions about this product?

SEND US REQUEST by filling the form below.

E-mail


Comment (not required)

Send

	Step 1 ADD TO CART	Step 2 CHECKOUT Select payment method.	Step 3 Confirm the order.
We are in business since 2002 and do our best to give our customers perfect service!

latonna roberson

2019-04-03 18:41:10

My Epson 1400 got the end of life message and I had already reset it once before so I couldn't use the Epson site to reset it. I remembered this site from years ago and purchased the utility reset and it worked like a charm. Only wish I had not spent $400 on a new printer before remembering your site. Anyways I just did a live video showing that this really works on my youtube channel. More people need to know about this remedy!

Hugo Daniel Musso

2015-10-19 17:13:35

I have an Epson PX710w it is a brilliant printer, happy was I...but then.... the now infamous \"end of life\" message appeared. After hours of research I found that Epson had a free download to reset and service printer, I downloaded only to find it did not work. On contacting epsonuk I was told that there is no reset utility or program for uk Epson printers and that I must take it to my local Epson service centre.... this would cost £80 plus vat and parts! more than a new printer. After advice from forums and many ebay offers of a \"genuine\" reset utility/key, I found 2manuals.com. through them I \"chatted\" with John who assured me it would work, despite Epson uk advice, and so proceeded to purchase. from start to finish it took less than ten minutes and I now have a fully working printer for a Meer $10 (about £8) I cannot recommend this company any higher ..... thank you very much 2manuals and John and one up on big greedy corporation\'s. Andrew in UK

TARIQUL ISLAM	2007-12-06 07:48:22
HOW WILL I GET THIS (R230) SERVICE MANUAL COMPLITELY FREE

haekal cakep	2005-07-13 01:49:24
i never try, but i wwanna ask about canon bjc-1000 eeprom adjustment program. if i buy that produk may i get this software

Colin Jones	2016-12-06 20:42:07
Very many thanks for working with me on this order. My printer is reset and I appreciate your patience working with me.

mihail andronic	2017-10-25 08:24:10
Looks ok, working fine, save a lot of time in my case, finding a bad sensor in 15 minutes, but can not read counter information`s. Only can reset.