|
|
|
|
Step 1
ADD TO CART |
Step 2
CHECKOUT
Select payment method. |
Step 3
Confirm the order. |
|
|
We are in business since 2002 and do our best to give our customers perfect service!
|
Our customers reviews:
| Andr1212 Sam | 2009-08-29 12:14:50 | | I ordered from you the service manual for my R2880 printer which showed me that I needed the adjustment program which I also ordered and now my printer operates correctly again!!!
Thanks | |
| Peter Sam | 2009-08-11 10:31:14 | | Thank you! This manual is exactly what I need. I really appreciate the quality of your product, and your prompt and helpful service. Sincerely, Peter | | | Melissa Varner | 2023-10-15 04:51:04 | | Very simple to perform on my Epson ET 2760. I received the ink pad reached its end-of-life error message on my printer. I replaced the Maintenace box and then used the reset key I purchased, and it seems to have fixed the issue. | |  | john ahlering | 2015-10-02 01:52:03 | Have had series of 8 Epson Printers. Artisan 837 had over 12700 printed pages and 4000 4x6 photos when it gave up the ghost with \"inkpads have reached end of life\" error.
I spent hours with Epson Support level 2 and they were very nice. Printer \"out of warranty\" so how about a new one. Went to Amazon and Bought Epson Expression 860.
Epson support said take Artisan to Epson Authorized Repair Center....I did. They said \"it\'s out of warranty, we can\'t waste the time (or money) trying to fix it!!\"
Used Epson Reset key from Epson 10 times and each time it , the error on inkpads, recurred. The Epson Utility does not do diagnosis like WIC Reset Utility!!
Bottom line...Fixed my own machine for very small price and I am ECSTATIC!
Thank You, Thank you and Thank you!!
Very Happy in San Diego | | | Ross Dell | 2010-10-19 06:15:32 | | Was very sceptical about the whole process - but one word sums it up - "BRILLIANT"
No hesitation in recommending the WIC reset utility process. | | | Joanne Phanco | 2024-10-23 16:30:21 | | Still using an old Epson ET-2550, got a warning that there was a problem with one of the ink pads then within a few days got an error code E-11 which stopped the printer working completely (ink waste collector full and needed a counter reset). Searched for issue and Bootstrappin' on Youtube talked through a fix using WIC Utility. The hardest part of the whole process for me was getting the ink waste collector off the printer and washing out the pads. The WIC Utility was really easy to install and use and has fixed the problem straight away. Wouldn't hesitate to recommend. | | | john Liang | 2018-08-16 18:24:01 | I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.
The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.
I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.
On the scale of 10 I would probably give it a 11 and it is more than just good! | | | Kirill Kubasov | 2020-07-09 06:57:09 | | My Epson XP-821 has been reset successfully to 80%. Thanks so much for solving my problem! | | | Ivan Tilbury | 2015-09-08 06:01:35 | I purchased the epson adjustment program last night and got to work on it today.
I had a clog in C and it would not clear. I ve had my 4900 for over 2 years and have been able to handle them until now.
I learned about this site from another site that has cleaner for the 4900 and said I need to buy this software first. I bought it and tried it with the epson ink that was in my printer. I ran the adjustment and it cleared C but then there were other clogs. Because they werent clogged before I started, I cleared them the normal way through the printers options. Had they not cleared, I would have ran the adjustment again.
I had tried everything to get C to clear for a week and this program did it in one try!
I would highly recommend this for clearing a stubborn clog. And now it is in my arsenal if I get another one that I cant clear down the road. By the way, it does not work if your printer is networked. Mine was so I had to move a computer into the room with my printer, directly connect to it and install the drivers. Then it work fine.
If you got a clog that you cant fix, just buy it. | |
|
Total customers: 402880
Customers online: 184
