Epson RX610, RX615 Printer Service Manual

$9.99
Epson RX610, RX615 Printer Service Manual
   Click to enlarge
      

This Epson RX610, RX615 service manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of Epson Stylus RX610, RX615. The instructions and procedures included herein are intended for the experienced repair technicians, and attention should be given to the precautions on the preceding page.

The chapters are organized as follows:

CHAPTER 1. PRODUCT DESCRIPTIONS

Provides a general overview and specifications of the product.

CHAPTER 2. OPERATING PRINCIPLES

Describes the theory of electrical and mechanical operations of the product.

CHAPTER 3. TROUBLESHOOTING

Provides the step-by-step procedures for troubleshooting.

CHAPTER 4. DISASSEMBLY AND ASSEMBLY

Describes the step-by-step procedures for disassembling and assembling the product.

CHAPTER 5. ADJUSTMENTS

Provides Epson-approved methods for adjustment.

CHAPTER 6. MAINTENANCE

Provides preventive maintenance procedures and the lists of Epson-approved lubricants and adhesives required for servicing the product.

CHAPTER 7. APPENDIX
Exploded Diagram / Parts List
Electrical Circuits

FORMAT: High resolution PDF document!
ZIP archive: 8 468 kB

Epson RX615 service Manual

I want to:

Any questions about this product?

SEND US REQUEST by filling the form below.





Step 1
ADD TO CART
Step 2
CHECKOUT
Select payment method.
Step 3
Confirm the order.


We are in business since 2002 and do our best to give our customers perfect service!

  yura ya 2011-08-13 09:04:22  
  Hi. I tried to reset printer Epson EP-901f (japanese model). I tryed everything possible I could - SCC utility, soft reset,.... so far no luck. Then i bought this and it reset my printer just in second. Thanks for good job. My printer is back to life again. I paid for this printer about $550US. Now I can use it again just for spending extra almost 10 dollars. It\'s worth it. Thanks for your great job. Well done!
  john Liang 2018-08-16 18:24:01  
  I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.

The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.

I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.

On the scale of 10 I would probably give it a 11 and it is more than just good!
  cyril beckley 2020-11-25 14:07:48  
  Fine! Reset worked!
  mohammed kateeb 2006-01-02 01:34:43  
  hi.........i want to thank u for ur website coz it has vry easy to download the file as will as directly download shortly ...gooooooooood luk
  musfari11 musfari11 2012-05-04 13:10:40  
  thanks alot , i almost didnt beleive it would work but im glad i spent 10 dollars with you instead of hundreds with some printer repair shop .. i hope you make millions..haha
  NACHO GOMEZ 2010-10-25 23:44:48  
  I got the flashing lights and Service required message on my Epson R2400, as many others have before!
I spent hours online and eventually managed to download Epsons own Adjustment Program. It showed me the waste ink settings but would not let me reset the counter, although I had disconnected the feed tubes and re-routed them to an external bottle.
Today I found 2Manuals.com and downloaded their WIC reset program. I thought It probably won\'t work but one key is only $9.99 so what the heck!
Well that was the best $9.99 I have ever spent - as soon as I entered the key and hit RESET the printer whirred into action, ink pumped into my waste bottle and I am back in action!

This has saved me a lot of money and the hassle of sending the printer to an Epson service centre. Truly a 5***** product! Chris Porteous, Prestatyn, U.K.
  asep suhendar 2010-06-30 18:43:28  
  The printer\'s ink pads are at the end of their service life. The program worked perfect.
Write review