|
|
|
|
Step 1
ADD TO CART |
Step 2
CHECKOUT
Select payment method. |
Step 3
Confirm the order. |
|
|
We are in business since 2002 and do our best to give our customers perfect service!
|
| Sara Carmona | 2020-03-25 16:28:17 | | My printer Epson has encountered problem with ink pad waste and use wic tools and it works with the simplest step by step instructions.
thank you.Trusted and recommended | |  | Bill Schumacher | 2013-02-22 05:48:12 | | I have a Epson TX700w printer I contacted epson in Australia for a fix for full ink pads. They were about as much help as an ash tray on a harley. I pulled the pads out joined a hose to the ink drain hose drilled a small hole in the case put the hose through to a bottle on the out side ink pad problem solved. Downloaded the WIC Reset Programe Reset counter job done. The printer is working like a new one. I will never buy another Epson product again. A big thankyou to the Wic Programe you have saved me a lot of money. Bill. | | | Gary Ouellet | 2011-12-01 05:23:29 | | Thanks, it worked exactly as the instructions provided. The only matter now is to get a kit for the waste ink. No wonder the ink is so expensive - so much goes to waste.
Where can I get a kit to store the wasted ink?
Thanks again, Gary | | | Evgen Test | 2010-08-31 09:42:53 | | My printer stopped printing with the error as \"General Error\" Epson quoted me $60 to send an engineer to fix my printer.
After reading through the information on this site I decided to fix it myself. Found the problem was related to the waste ink pad counter.
Only 10 minutes, I had the the printer working. The printer tested fine and has done approx 150 pages since with NO issues.
Thanks for your WIC PROGRAM! | | | Ahmed Moudnib | 2018-07-24 09:06:25 | | "A printer's ink pad is at the end of its service life" - Great! It worked! Thank you very much | | | john Liang | 2018-08-16 18:24:01 | I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.
The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.
I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.
On the scale of 10 I would probably give it a 11 and it is more than just good! | | | john ahlering | 2015-10-02 01:52:03 | Have had series of 8 Epson Printers. Artisan 837 had over 12700 printed pages and 4000 4x6 photos when it gave up the ghost with \"inkpads have reached end of life\" error.
I spent hours with Epson Support level 2 and they were very nice. Printer \"out of warranty\" so how about a new one. Went to Amazon and Bought Epson Expression 860.
Epson support said take Artisan to Epson Authorized Repair Center....I did. They said \"it\'s out of warranty, we can\'t waste the time (or money) trying to fix it!!\"
Used Epson Reset key from Epson 10 times and each time it , the error on inkpads, recurred. The Epson Utility does not do diagnosis like WIC Reset Utility!!
Bottom line...Fixed my own machine for very small price and I am ECSTATIC!
Thank You, Thank you and Thank you!!
Very Happy in San Diego | |
|
Total customers: 342990
Customers online: 23
