Click to enlarge

Pay by PayPal here Key

The One Time FIRMWARE KEY is required for changing printers firmware.

WIC Reset Utility is used to change printers firmware in following cases:

1. Change to Chipless Firmware - it means printer will not need IC Chips on ink cartridges. Ink levels will be frozen to 100% for ever.
2. Downgrade firmware - this is required when NON ORIGINAL ink cartridges are NOT recognized by printer. This is because printers firmware has been updated from Epson server to newest firmware where not original ink cartridges are forbidden to be used. In this case You have to Downgrade firmware back to old.

Supported models for Chipless Firmware:
WorkForce
WF-2650, WF-2651
WF-2750, WF-2751
WF-3540, WF-3541
WF-3620, WF-3621
WF-3640, WF-3641
WF-4630
WF-4640
WF-5110
WF-5190, WF-5191
WF-5620
WF-7110/7111
WF-7610, WF-7611, WF-7620, WF-7621, PX-M5040F, PX-M5041F
WF-8010

SureColor
SC-P400, SC-P407, SC-P408, PX7V2

PX-M5040F
PX-M5041F
PX-M741F
PX-S840

XP-330
XP-600, XP-601, XP-605

If Your printer model is not listed here - You have to check for Chipless Solutions here - https://chiplesssolutions.com/support.shtml

If You have questions about using WIC utility for making printers chipless - please read this thread - How to make printer Chipless

How many KEYs you want to order:

	Step 1 ADD TO CART	Step 2 CHECKOUT Select payment method.	Step 3 Confirm the order.
We are in business since 2002 and do our best to give our customers perfect service!

Our customers reviews:

Jhazmin Raya

2020-08-18 20:35:17

I have modified the firmware of an Epson wf3620 with the firmware key to make the printer run with chipless ink cartridges. The instructions were clear but must be followed exactly in order for the process to be successful. I am very happy with the result as I have the freedom to use oem ink or not depending on my needs. No oem cartridges now work perfectly well. Well done wic utility people. regds, Peter.

JOSEPH MORWA	2018-07-15 02:04:21
I made the mistake of upgrading the firmware in my Epson XP-434. That caused my ink cartridges to not be recognized. I found this WIC Reset Utility after after searching for original firmware version. I bought the key and plugged it into the utility, and bingo 10 minutes later I was up and running. Thanks a bunch 2manuals.com!

Farhan Hossein	2018-03-04 06:43:56
Nevermind. Did more research and to resolve the error, aside the firmware downgrade, I removed the ink, unplugged the printer, turned the printer back on, and placed the Ink's in individually pressing done after each ink. Doing this I was able to get it back up and running again. Thanks!

Gerd Eilert	2005-04-22 10:05:03
by other wise i need u to info me about service manual if it has trouble codes and diagnostic and troubleshooting procedures ?......thanx

Matt Sparks	2019-07-01 22:27:51
This tool is badly wrtten, after downgrading using the wrong firmareware version I was unable to purchase another key as it thought it was a duplicate order, tried online help waited a hour and gave up, in total I have wasted £40 on a CISS system thats not reconized by the printer, and £20 on the WIC tool that although was my fault, I can remedy because I can't puchase another key

Neil Skidmore

2015-11-23 00:28:01

Ace. I downloaded the programme which told me that one waste ink was at 65 % and the other was at 100% This told me that the programme was communicating with the printer (Another utility I tried would not even talk to the printer.) This gave me confidence to buy the key to activate the reset. It worked in seconds and my now perfectly functioning A3+ printer is no longer a pile of scrap. If only Epson UK were this good!!!

NORWIN SENORON	2019-08-26 20:04:05
reset ok on epson dx7400. super :-), pay ok with paypal

Peter Sam	2009-08-11 10:29:23
YES YOU ARE A GENIOUS THANKS A LOT! THE PROGRAM IS WORKING NOW!

Debora Debora	2015-08-13 21:12:25
Amazed that it worked. It took a few runs on a printer that had been clogged for over a year and finally, perfect nozzle check. Still won\'t quite unclog another machine, but well worth $30.

excape excape	2020-08-21 16:19:34
Unbelievable how the reset worked so well! Thanks a lot.

Alexey Scherbenko

2020-01-15 16:42:26

HELLO!!! Today I bought a key for updating the firmware of my SC P-600 printer. After activ ating the key, WIC started updating the firmware and the message "ROM is not writeable" popped up on the printer screen. Now when I power on printer - I get "Recovery mode". What can I do now?! ======Answer======== Please read how easily and quickly it can be solved - www.wic.support/epson-wf-3720-stuck-in-recovery-mode-quick-and-esy-solution/