Konica / Minolta magicolor 1680MF, 1690MF Service Manual

$9.99
Konica / Minolta magicolor 1680MF, 1690MF Service Manual
   Click to enlarge
      

Konica / Minolta magicolor 1680MF, 1690MF Service Manual

This Konica / Minolta magicolor 1680MF, 1690MF Service Manual is designed for experienced repair technicians only and not designed for use by the general public.

TABLE OF CONTANTS:
System configuration
Product specifications
Periodical check
Service tool
Remote Setup Utility (only magicolor 1690MF)
Firmware upgrade
Other
How to use the adjustment section
Description of the control panel
PRINTER MODE
REPORT/STATUS mode
UTILITY mode
User service mode
SERVICE MODE
SOFT SWITCH set
Fax Protocols
Jam display
Malfunction code
Power supply troubles
Image quality problems
FAX error
Scan error
Parts layout drawing
Connector layout drawing
Timing chart

High quality PDF format document. 426 Pages.
33 765 kB

Any questions about this product?

SEND US REQUEST by filling the form below.





Step 1
ADD TO CART
Step 2
CHECKOUT
Select payment method.
Step 3
Confirm the order.


We are in business since 2002 and do our best to give our customers perfect service!

  Fabrizio d'amore 2012-11-20 18:35:38  
  Ordinata chiave resettato contatore tutto ok! Veloci ed affidabili per il reset della stampante mi aveveno chiesto 50€, invece con 9,99 $ ho risolto.
  Ruth Mason 2006-09-19 06:57:12  
  It worked fine. It was just that we didn't know where to start with opening the program. I couldn't get it to install so there was an icon that took us into the whole program. I found out that if I clicked on the one icon it opened the one we needed. The service manual will be of great help for later when the ink absorption pad needs changing. Thanks for your prompt attention. Regards, Ruth
  mohammed chelsea 2016-10-01 05:15:52  
  Thank you so much WIC reset!!! you are really a big help! i owe you this!!! thankyou so much!!!
  mauro albanese 2020-10-22 13:26:46  
  Just over a week ago, I figured I was going to be in the market for a new printer. When the error message came up on my Epson XP-610 stating that "Parts inside the printer are at the end of their useful life" I initially was quite disappointed. However, after a quick Google search for that phrase, I came across the OctoInkjet website. After a little further research, I decided to give the trial waste ink counter reset code a shot - after all, what did I have to lose - and, somewhat to my surprise, it worked! Knowing that I then needed to purchase a new set of ink pads and a reset key to fully resolve my printer issues, I was pleasantly surprised at the low cost of purchasing both of these items together. I then placed my order, but knowing that the product was coming from overseas (I'm in the USA), I figured it would be a minimum of at least a few weeks before my printer pads arrived. But, lo and behold, the pads arrived on my doorstep in just over a week! I was thrilled and so I quickly replaced the pads in my printer with the new set (which, by the way, were a perfect fit and the instructions provided were excellent), ran the counter reset program applying the reset code I had purchased, and everything worked flawlessly! So now it feels like I have a brand new printer (although it's probably about 5 years old) and I can continue to purchase inexpensive third party ink cartridges (which I have always done), continuing to save me money for years to come. Thank you OctoInkjet!!! I will certainly be telling others to check out your product. P.S. - I seldom write product reviews so this shows how impressed I am with this product. I particularly love it when a solution is provided that overcomes "planned obsolescence" by the manufacturer.
  Patrick Blom Bachstein 2016-02-25 19:28:33  
  So had my Epson Pro 4900 disconnected from powersupply for about a month and a half, due to new facilities in my studio. Powered it up, printed a nozzle check, and banged my head against the wall! Only magenta and light cyan did appear, and two broken lines of photo black. Did the Windex trick 5-8 times, and at the 16. nozzlecheck, 9 colours appeared, BUT some actually has got worse, the more Windex the head had.
Preparing myself on making a stronger brew for the cleaning (a lot of Googling and reading!), I came across the Service Program. Reluctant to spill ~ 150 ml of ink, I first moved along (also, the website seemed shady, however, alot of mentions on various foras).

Today I decided \'What the heck, 30 bucks, if it doesn\'t work, I\'ll survive\', so I purchased a license, installed on a laptop (with USB connection instead of network), and chose the option to prime the left channels first - and WOW: EVERY nozzle on that side now fired, and made an (99%) perfect nozzle check. So did the other side, when finished filling the lines again.
So: 5 f*cking huge stars from me! :)
Thank you for this wonderful utility!
  banda print 2007-07-25 14:50:25  
  Epson Stylus R340, R350 Version 13!! Service Program
  Ron Lugo 2012-10-17 03:56:00  
  Wow! Your program works perfect under the 64bit environment. You are my savior style in terms of the time and effort. There is no epson service center in my area. Thank you so so much. I will advertise for you. God bless you.
Write review