Pay by PayPal here Key
The One Time FIRMWARE KEY is required for changing printers firmware.
WIC Reset Utility is used to change printers firmware in following cases:
1. Change to Chipless Firmware - it means printer will not need IC Chips on ink cartridges. Ink levels will be frozen to 100% for ever.
2. Downgrade firmware - this is required when NON ORIGINAL ink cartridges are NOT recognized by printer. This is because printers firmware has been updated from Epson server to newest firmware where not original ink cartridges are forbidden to be used. In this case You have to Downgrade firmware back to old.
Supported models for Chipless Firmware:
WorkForce
WF-2650, WF-2651
WF-2750, WF-2751
WF-3540, WF-3541
WF-3620, WF-3621
WF-3640, WF-3641
WF-4630
WF-4640
WF-5110
WF-5190, WF-5191
WF-5620
WF-7110/7111
WF-7610, WF-7611, WF-7620, WF-7621, PX-M5040F, PX-M5041F
WF-8010
SureColor
SC-P400, SC-P407, SC-P408, PX7V2
PX-M5040F
PX-M5041F
PX-M741F
PX-S840
XP-330
XP-600, XP-601, XP-605
If Your printer model is not listed here - You have to check for Chipless Solutions here - https://chiplesssolutions.com/support.shtml
If You have questions about using WIC utility for making printers chipless - please read this thread -
How to make printer Chipless
|
|
|
|
|
Step 1
ADD TO CART |
Step 2
CHECKOUT
Select payment method. |
Step 3
Confirm the order. |
|
|
We are in business since 2002 and do our best to give our customers perfect service!
|
Our customers reviews:
| Jhazmin Raya | 2020-08-18 20:35:17 | | I have modified the firmware of an Epson wf3620 with the firmware key to make the printer run with chipless ink cartridges. The instructions were clear but must be followed exactly in order for the process to be successful. I am very happy with the result as I have the freedom to use oem ink or not depending on my needs. No oem cartridges now work perfectly well. Well done wic utility people.
regds, Peter. | |
| JOSEPH MORWA | 2018-07-15 02:04:21 | | I made the mistake of upgrading the firmware in my Epson XP-434. That caused my ink cartridges to not be recognized. I found this WIC Reset Utility after after searching for original firmware version.
I bought the key and plugged it into the utility, and bingo 10 minutes later I was up and running.
Thanks a bunch 2manuals.com! | |
| Farhan Hossein | 2018-03-04 06:43:56 | | Nevermind. Did more research and to resolve the error, aside the firmware downgrade, I removed the ink, unplugged the printer, turned the printer back on, and placed the Ink's in individually pressing done after each ink. Doing this I was able to get it back up and running again. Thanks! | | | Margaret Scheperle | 2013-01-04 01:13:05 | | Sure wish your live support was online. I could understand it being down on New Year's Eve, but not today.
I sent an email to this effect also, but no reply.
The reset key worked, thanks. For just half a day, however. Not what I expected for $9.99. Please advise. | |  | Yıldırım Oran | 2006-09-01 11:47:41 | | Toshiba 2060 service manuels ihtiyacım var. Anlıyor musunuz. | | | Elizabeth McLain | 2020-02-24 00:13:12 | | Absolute lifesaver. Saved me about $100 and 2 hours driving. | | | Claude Henry | 2016-04-18 16:13:06 | | Un �norme Merci � Bruno Cohen Apr�s l'achat su service Program epson 4900 et l'application de � initial ink charge � mon imprimante avec 4 buses bouch�es malgr� les diff�rents nettoyages effectu�s refonctionne parfaitement.
Bravo et mille mercis | | | john Liang | 2018-08-16 18:24:01 | I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.
The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.
I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.
On the scale of 10 I would probably give it a 11 and it is more than just good! | | | Wesley Pritchard | 2004-02-07 21:55:21 | | The only way to really adjust you printer is by using this program. The owner the printer could not adjust the print using the regular adjustmest utility incleuded in the printer drivers. But this program did the trick. The printer is perfectly adjusted and the owner is very happy with the printer now. | | | matt hoffman | 2012-01-22 20:45:03 | | Wow, I cannot believe that this actually worked. I had some issues when ordering the reset key, but i contacted the website via email and they immediately got back to me and sent me the key code. ran the program and the printer now works again. I had tryed the reset utility from epsons website, but it didnt work how it was supposed to, it would reset but when you would go to print it would go back to the flashing inkpad needs replaced. I will have to print for a while and see how long this actually works, but for now this has saved this printer from going into the trash. I am glad i stumbled across this program and the website. (used on Epson Artisan 800). | |
|
Total customers: 438171
Customers online: 124
