Roland XC-540 Service Manual

$9.99
Roland XC-540 Service Manual
   Click to enlarge
      

Roland XC-540 Service Manual


CONTENTS

1. Structure & Spare Parts
2. Electrical Section
З. Replacement of Main Parts
4. Adjustment
5. Supplemental Information
6. Troubleshooting
7. Service Activities

FORMAT: PDF Service Manual document!
Zip archive: 17 806 kB

I want to:

Any questions about this product?

SEND US REQUEST by filling the form below.





Step 1
ADD TO CART
Step 2
CHECKOUT
Select payment method.
Step 3
Confirm the order.


We are in business since 2002 and do our best to give our customers perfect service!

  Rebecca Taylor 2018-09-24 22:44:51  
  This fixed my Epson R2400 printer! Whew! Thank you!
  john Liang 2018-08-16 18:24:01  
  I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.

The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.

I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.

On the scale of 10 I would probably give it a 11 and it is more than just good!
  agustin lopez 2020-11-26 18:44:27  
  I used free trial for my xp 540. Now it's ok again. Thank you..
  Evgen Test 2010-08-31 09:40:59  
  My printer stopped printing with the error as \"General Error\" Epson quoted me $60 to send an engineer to fix my printer. After reading through the information on this site I decided to fix it myself. Found the problem was related to the waste ink pad counter. Only 10 minutes, I had the the printer working. The printer tested fine and has done approx 150 pages since with NO issues. Thanks for the WIC program!
  Jonathan Gadsby 2011-03-20 20:14:38  
  Worked perfectly 1st time !!!! Thank you, just saved me £100 on a new printer !! 8)
Write review