Epson Picture Mate PM100 Service Adjustment Program

$9.99
Epson Picture Mate <b>PM100</b> Service Adjustment Program
   Click to enlarge
      

The Epson Adjustment Program for Epson PictureMate 100 can be used under Windows only (Millenium, 2000, XP, Vista [in compatibility mode]).

To find out how to use this utility to reset the waste ink counter we recommend reading the:
5 Clicks Reset Procedure

To get this adjustment program, for the PictureMate 100 you need to do the following:

  1. Purchase the utility from 2manuals.com.
  2. You'll get download link on-line and in the email message.

We recommend reading the Epson PictureMate 100 Service Manual before using the adjustment utility.

Please contact us if you have not received your order.

You can run this program under Windows XP, Windows Vista, Windows 7 in compatibility mode. It is easy!

Lets get to know how to set it up.

To configure the compatibility mode for an application, just locate the installation directory and right click on the .exe file (program you want to run), selecting Properties from the menu.

Select the Compatibility tab:


Windows 7 compatibility mode


You can choose to run the program in Windows XP compatibility mode.

FOR THIS PROGRAM please use the WINDOWS XP compatibility mode!!!



Download the program and run in compatibility mode!

I want to:

Any questions about this product?

SEND US REQUEST by filling the form below.





Step 1
ADD TO CART
Step 2
CHECKOUT
Select payment method.
Step 3
Confirm the order.


We are in business since 2002 and do our best to give our customers perfect service!

  Bill Schumacher 2013-02-22 05:48:12  
  I have a Epson TX700w printer I contacted epson in Australia for a fix for full ink pads. They were about as much help as an ash tray on a harley. I pulled the pads out joined a hose to the ink drain hose drilled a small hole in the case put the hose through to a bottle on the out side ink pad problem solved. Downloaded the WIC Reset Programe Reset counter job done. The printer is working like a new one. I will never buy another Epson product again. A big thankyou to the Wic Programe you have saved me a lot of money. Bill.
  Claudia Díaz 2020-06-14 01:34:36  
  This update helps to recognize compatible cartridges or continuous system with self-resetting chip that I stopped recognizing due to firmware update in Epson WF-7510 Printer.
  Paul Jumbo 2019-04-19 18:47:57  
  I had Epson WF-2650 and it wasn't printing fully, skipping lines, even though colors were full.
I did a lot of cleaning, head cleaning, put new cartridge but no luck. I did some head cleaning using glass cleaner and syringes as shown on various youtube video.
After that, my printer didn't recognize two of the cartridges. I tried everything, cleaning contacts etc, nothing worked.

I was finally going to buy new cartridges however stores were closed today so I decided to look for chip-resetting tool but nothing good was available locally.

I came across this WIC reset utility and was really skeptical if it will work. I took the chance, bought the key, used the tool to reset firmware to chipless firmware, it was successful at the first go.
At this point, printer showed all ink levels 100%. I printed a test page and it came out perfect.
To make it even more interesting for me, I live in Europe and during one of the trip, I bought two sets of XL cartridges for this same model but printer didn't recognize in the past and I was going to throw them since these were no good for my EU model. I tried these again after chip reset firmware and voila, they works too.

I am amazed at the propaganda of these printer manufactures that even original printer cartridges from US didn't work on the model here in EUROPE, these used to fit perfectly but printer wouldn't recognize however, now they works too.
Today, I was almost ready to trash my 2.5 yr old and not much used printer but after a lot of trying and finally using WIC reset utility, the printers works like new and saved me a lot!

These were the best 20 CHF/USD I spent today!
Thank you very much and I don't need to worry about relying on a hardware chip-reset tool. I will now be able to use US model cartridges and re-fill i like without having to worry. I even printed some photos using this same printer on photo paper today and printer did an excellent job.
  Garnett Stokes 2011-01-09 12:37:59  
  My Epson R2880 stopped printing and showed alternating ink and paper flashing lights. I had an extended warranty that I purchased with the printer but because I didn\'t register the warranty within 30 days I was told by Mack Camera that they would not honor the warranty. So after much research and web surfing I found myself at 2manuals. I wasn\'t even sure that the wic was the problem and I had serious doubts about spending more money on what could just be another scam like the extended warranty was. However like one reviewer said, what was $9.99. Well I downloaded the program, obtained the $9.99 pin code, loaded the software, and exactly as the video shows I was up and running. I couldn\'t believe it when the printer sprung to life and was ready to print. Hey, try it. You\'ll be glad you did.
  igor shlaifman 2018-11-04 00:54:01  
  It works perfect to disable the ink level on EP WF-5190. Thanks.
  YuanYuan Wang 2008-01-19 13:27:07  
  Was pulling my hairs out when my R340 displayed the message "parts reaching end of service life, see manual". As I know these printers are not made to be "servicable", and I am not ready to pay another hundred pounds for a new printer, I was devastated. Thanks to this service program, it took away the warning message and I can continue using my R340 with the CISS. Phew!! Please note that you DO need to redirect the waste ink or replace the waste ink pads or you may risk dealing with an over-spilled printer. A wise investment into this program. Thank you.
  svenn svenson 2012-03-05 19:14:52  
  THIS IS A MUST HAVE UTILITY This reset key worked perfectly for my Epson Artisan 800. I tried the Epson reset utility (free from Epson) many times. It would "reset" the counter to "40%", then upon turning printer off - on, it would revert to "0%" with the error message that the inkpads had reached their end of life. This also happened whenever I performed a head cleaning. For those of us who use a CIS (I am not affiliated with inkproducts.com - but have been using their CIS for a couple of years and LOVE the quality and service) - it is imperative to be able to reset this waste ink counter. I should also add, the waste ink pad issue is real - don't expect to simply reset the waste ink counter and go happily on your printing way - you will have a disaster and you will experience frequent head clogging. You MUST use an external waste ink disposal system - either make your own for $5 or buy one. THIS + the reset utility is what enables you to get the true value from your CIS-modified printer.
Write review