Click to enlarge

Canon Service Tool-a Ver7.00 for Canon iP1200, iP1300, iP1600, iP1700, iP1800, iP1900, iP2200, iP2500, iP2600 printers models
l
To reset waste ink pads counters you have to use this Ver 7.00 Service Tool-a. First put the printer in Service Mode:

1. Order and DOWNLOAD Service Tool-a Ver7.00
2. Unzip downloaded file by WinZip.
3. Install printer drivers and set printer as a default printer in the system.
4. Connect the printer by USB cable.
5. Unplug the printer power cable.
6. Press and hold power button and connect the power cable.
7. While holding power button wait until Power indicator will come ON and press Resume button twice. Release all buttons. The indicator will flash few times and come to constant green light
If you have not constant green light but flashing green or orange lights - that means you have other printer errors. You have to fix them first! If you have not fixed them - you will be not able to reset the waste ink counter!
The printer is now in Service Mode and you can now run the program and reset the waste ink counter.

8. Run Service Tool-a Ver7.00 under Windows XP
9. Check and select the connected USB port number from USB PORT
10. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.
If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.
11. Close the program and power off the printer.

Service Tool-a Ver7.00

ZIP archive: 13 800 kB

Any questions about this product?

SEND US REQUEST by filling the form below.

E-mail


Comment (not required)

Send