|
|
|
|
Step 1
ADD TO CART |
Step 2
CHECKOUT
Select payment method. |
Step 3
Confirm the order. |
|
|
We are in business since 2002 and do our best to give our customers perfect service!
|
| john Liang | 2018-08-16 18:24:01 | I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.
The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.
I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.
On the scale of 10 I would probably give it a 11 and it is more than just good! | |  | talant 51 | 2020-02-01 16:53:00 | i reset with the key that i got and nothing worked. it still shows that the carts are not genuine. what a waste of time. it sat here for 12 hours on the "do not turn off printer" epson wf-7210.... give me back the $30 i spent or give me more keys to try again. order #18740047
===============================
According to your Order number - You have purchased RESET Key ($9.99) which is required for Wate Ink Counters reset. If You want to downgrade firmware - You have to buy FIRMWARE Key ($19.99) | | | tom tannenberger | 2003-12-13 07:25:09 | | I figured it out. I ended up purchasing the LJ 1100 manual. I
just used a different email address and it worked fine. Btw, the service
manual helped me out tremendously! It paid for itself easily. I will
definitely be using your service manuals again in the future.
Thanks, | | | Gary Robert | 2011-04-05 01:39:23 | | H i 2 m a n u a l s ,
THANK YOU !!!
I just downloaded my WIC reset key, fired up my Epson Stylus Photo 2200 and it works great.
This model wasn't on your "works with" list, so you might want to add it.
Gary Robert
San Francisco | | | Darius Sruoginis | 2025-02-03 17:37:11 | | Changed the waste ink pads with the new ones and used WicReset for reseting waste counter on Epson L382. Received the key without any delay, right after placing the order and paying for it. Worked perfectly. Counter became 0,00%.
Great utility! | | | Richard Langenhuizen | 2025-05-04 06:29:28 | | I was unable to use your reset key. please return my charges immediately. | | | mehmet ramiz alp | 2019-10-17 06:50:32 | | Thank you so much for this trail. your service is very good. my printer was not working from two three weeks. then i found this app. once again thanks a lot. | | | mihail andronic | 2017-10-25 08:24:10 | | Looks ok, working fine, save a lot of time in my case, finding a bad sensor in 15 minutes, but can not read counter information`s. Only can reset. | |
|
Total customers: 435268
Customers online: 102
