|
|
|
|
Step 1
ADD TO CART |
Step 2
CHECKOUT
Select payment method. |
Step 3
Confirm the order. |
|
|
We are in business since 2002 and do our best to give our customers perfect service!
|
| Ernest Wolniak | 2016-08-17 20:24:52 | | the rester reset epson P600 with at26fb firmware | |  | Abel Guerrero | 2020-04-26 15:45:55 | | Thank you so much. After days, weeks of search online (and lots of non working trials), I finally found your website and your reset did work. Fab! | | | john Liang | 2018-08-16 18:24:01 | I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.
The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.
I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.
On the scale of 10 I would probably give it a 11 and it is more than just good! | | | Osiris De los Santos | 2021-01-27 13:10:51 | | Funktioniert wunderbar kann ich nur empfehlen +++++ | | | Karlheinz Hasenburg | 2020-11-10 19:55:47 | | Perfektes Produkt! Drucker Epson XP-860 problemlos erkannt, eindeutige Benutzerführung, nach Kauf des Lizenzschlüssels einwandfreie Funktion. Vielen Dank! | | | essam elkods | 2006-11-30 11:42:14 | | This is just what I need. This manual is perfect! | | | Paul Inouye | 2016-12-16 20:41:53 | | Thanks for the program and manual. I was able to revive a 2 year old 4900.
I had 100% blockage in 8 of the 11 heads, and over 50% blockage in the last
three.... I ran the ink charge with cleaning fluid. Now I have 100% of the
nozzle check pattern on ALL of the heads. I was blown away. I thought for
sure I was going to pay for a new head. So, thank you.
I also have a an older Epson Stylus Pro 4000. It has been sitting a while
and the heads are dried up. Do you have the same program and manual for
this printer? I would like to try to revive it as well. If you do could
you just send me a link? Thanks again | |
|
Total customers: 445184
Customers online: 153
