|
|
|
|
Step 1
ADD TO CART |
Step 2
CHECKOUT
Select payment method. |
Step 3
Confirm the order. |
|
|
We are in business since 2002 and do our best to give our customers perfect service!
|
| ko pink | 2014-06-18 13:23:30 | | thank that is fine.next i am down other counter reset software. | |  | Alan Page | 2017-07-23 03:33:02 | | brilliant - absolutely brilliant. Thank you.
Thought I would have to trash my printer and the unused ink cartridges.
Only hiccup was needing to disable my security protection to install this wonderful product.
Used it as a trial - which proved it worked - then bought the key to finish the job.
I am wrapped as you have saved me hundreds of dollars as there is nothing wrong with the quality of the printing.
Cheers,
Alan. | | | john Liang | 2018-08-16 18:24:01 | I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.
The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.
I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.
On the scale of 10 I would probably give it a 11 and it is more than just good! | | | george prionidis | 2009-02-11 00:00:35 | | thank you for fast respond I will recommend you to all my friends in Iran and Emirate UAE
You are the best and god be with you! | | | Gerard van Bennekom | 2019-06-18 14:00:12 | | Much easier then I had expected.
Downloaded the program, purchased the key, switch off and on the printer and that was it!
The printer works again. | |
|
Total customers: 402588
Customers online: 78
