|
|
|
|
Step 1
ADD TO CART |
Step 2
CHECKOUT
Select payment method. |
Step 3
Confirm the order. |
|
|
We are in business since 2002 and do our best to give our customers perfect service!
|
| david miranda | 2016-04-07 16:43:28 | My Epson Stylus R280 is printing again! This was my favorite printer for photos and quick single-sided jobs. It printed and printed until the dreaded message and alternating flashing orange lights appeared.
I was skeptical that WicReset could do anything because of the flashing lights. I downloaded the Windows version (XP), virus scanned it and after it passed, installed it. I first tried the trial reset that sets the waste counters to 90%. That worked immediately. I bought a key. That worked immediately and now my printer is working like new and waste counters are near 0.
I use a continuous ink system (CIS) on my Epson printers... have for years. This software also has a nice utility to charge the cartridges and clean the heads. My R280 printer sat for a while after the counters reached limit and the ink lines filled with air. I used the WicReset utility to charge & clean, and now it prints like new.
This software is easy to use and guides you step by step. I encountered no difficulties and everything worked first time. It is very good that there are smart engineers out there who took the time to reverse-engineer Epson\'s awful ink pad limitations.
One note of caution, and this has nothing to do with WicReset... I print so much and fear my ink pads will truly overflow, so I\'ll be installing a waste ink tank on my printers. I had one on an ancient R200 printer and it worked great. This is an essential accessory for CIS printers.
Thank you WicReset. | |  | ion barboi | 2012-09-13 00:11:51 | | John I want to Thank You for all your help.
I own and run a T-Shirt printing company, nothing big but it helps and I use the printer to print out the film that I need to silk screen them, again Thank You. | | | Pen Joe Pendi | 2007-07-12 17:04:22 | | | Paul Jumbo | 2019-04-19 18:47:57 | I had Epson WF-2650 and it wasn't printing fully, skipping lines, even though colors were full.
I did a lot of cleaning, head cleaning, put new cartridge but no luck. I did some head cleaning using glass cleaner and syringes as shown on various youtube video.
After that, my printer didn't recognize two of the cartridges. I tried everything, cleaning contacts etc, nothing worked.
I was finally going to buy new cartridges however stores were closed today so I decided to look for chip-resetting tool but nothing good was available locally.
I came across this WIC reset utility and was really skeptical if it will work. I took the chance, bought the key, used the tool to reset firmware to chipless firmware, it was successful at the first go.
At this point, printer showed all ink levels 100%. I printed a test page and it came out perfect.
To make it even more interesting for me, I live in Europe and during one of the trip, I bought two sets of XL cartridges for this same model but printer didn't recognize in the past and I was going to throw them since these were no good for my EU model. I tried these again after chip reset firmware and voila, they works too.
I am amazed at the propaganda of these printer manufactures that even original printer cartridges from US didn't work on the model here in EUROPE, these used to fit perfectly but printer wouldn't recognize however, now they works too.
Today, I was almost ready to trash my 2.5 yr old and not much used printer but after a lot of trying and finally using WIC reset utility, the printers works like new and saved me a lot!
These were the best 20 CHF/USD I spent today!
Thank you very much and I don't need to worry about relying on a hardware chip-reset tool. I will now be able to use US model cartridges and re-fill i like without having to worry. I even printed some photos using this same printer on photo paper today and printer did an excellent job. | | | masiha2000 mohammad | 2011-06-17 19:46:11 | | epson r1900 worked perfect. have reset waste ink counter ok | | | Mark Wainwright | 2022-11-15 18:03:40 | | Very impressed!
After a fruitless search for official Epson support for the Waste Ink error I found a YouTube video showing how to remove and clean the ink pads but still needed to reset the counter.
After some initial "Is this unofficial 3rd Party Solution a scam?" trepidation I took a chance on the WIC reset tool and now, about half an hour (mainly spent drinking tea and waiting for the key to be emailed) and 6 quid later I have a fully functioning XP-342.
In the meantime, Epson UK responded to a message I sent them on Twitter, telling me that I could send the printer away to their service centre for an unspecified period of time and pay them £48 to have the ink pads changed and the counter reset. All with a caveat that having "tampered" with the ink pads myself, the service centre might refuse to fix the printer.
Thanks for a great piece of kit which has saved me a lot of time, effort and money. | | | Lothar Hennig | 2012-01-08 15:51:25 | | Hat alles super geklappt und sogar ohne große Englisch Kenntnisse.
Bin begeistert immer wieder. | | | Christopher Redding | 2021-03-28 22:33:24 | | Epson stylus DX7400 stopped working with E light. Reset using free trial key and now works again. Thank you. | |
|
Total customers: 444109
Customers online: 124
