DeskJet 1220 Series Printer Service Manual

$9.99
DeskJet 1220 Series Printer Service Manual
   Click to enlarge
      

DeskJet 1220 Series Printer Service Manual

This guide is designed as a reference for people who provide post-sale technical support to end-users of
the HP DeskJet 1220 Series Printer.

Contents:

Chapter 1 Product Information
Product overview
Specifications
Safety and Regulatory Notices
Service and Support Information
Warranty

Chapter 2 Installation and Configuring thr Printer
Connecting Power to Printer
Connecting the Interface Cable
Installing Printer Software
Verifying Communication in Windows
Using the Printer on a Network
Uninstalling Printer Software

Chapter 3 Printer Operation
Using the Keypanel
Using the Control Panel
Using the HP DeskJet Control Panel for DOS
Using the YH 1220C ToolBox

Chapter 4 Selection and Paper Loading
Selection Paper
Loading Paper in Main (Bottom) Media Tray
Loading Paper in Alternative (Top) Media Tray
Loading Paper Through Rear Media Feed
Clearing Paper Jams

Chapter 5 Printer Maintenance
Cleaning the Printer
Using and Caring for Print Cartriges

Chapter 6 Troubleshooting
Troubleshooting Strategy
Software Troubleshooting
Hardware Troubleshooting
Diagnostic Tools

Chapter 7 Removal, Replacement and Calibration
Removal and Replacement Strategy
Disassembly Sequence
Consumer Removable Parts
Parts Serviceable without Calibration
Serviceable Parts that Require Calibration
Removal and Subassembly Parts
Calibration the Printer

Chapter 8 Parts and Diagrams

Appendix

FORMAT: High resolution PDF document
ZIP archive: 4 507 kB

I want to:

Any questions about this product?

SEND US REQUEST by filling the form below.





Step 1
ADD TO CART
Step 2
CHECKOUT
Select payment method.
Step 3
Confirm the order.


We are in business since 2002 and do our best to give our customers perfect service!

  Devid Moretton 2015-01-25 19:50:30  
  I found the problem, why the reset diidnt work. it was in depending of the epson status monitor. I was going to the task manager and stopped the status monitor. The problem was \\\"The printer statut manager\\\" After stopping status monitor, the reset was work probably. Thanks
  john Liang 2018-08-16 18:24:01  
  I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.

The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.

I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.

On the scale of 10 I would probably give it a 11 and it is more than just good!
  Tim Nichols 2012-08-11 05:20:43  
  I was leery about paying the $9.99 for a key. After speaking to Epson "Specialist" and being told "Your machine must have issues beyond repair, but we can sell you a new one for $190" I decided to go ahead and try this software. A++ I would recommend this to anyone wishing self repair an epson printer. I have a RX595 , I use a CCS and when I received the waste pad error I was heartbroken. I love this printer. I tried bypassing waste pad but still got the error. This software is well worth the $$ Thank you
  NAREN NAREN 2009-05-05 19:38:21  
  This is what I need. Thanks.
  talant 51 2020-02-01 16:53:00  
  i reset with the key that i got and nothing worked. it still shows that the carts are not genuine. what a waste of time. it sat here for 12 hours on the "do not turn off printer" epson wf-7210.... give me back the $30 i spent or give me more keys to try again. order #18740047

===============================
According to your Order number - You have purchased RESET Key ($9.99) which is required for Wate Ink Counters reset. If You want to downgrade firmware - You have to buy FIRMWARE Key ($19.99)
  angga sri 2006-11-28 06:47:39  
  be epson maniac. because epson is the best. and all my product always use epson. Thank you!
  John Safranek 2010-03-29 19:19:29  
  Does NOT contain ANY instructions for replacing the waste ink pad cartridges!!!
Write review