|
|
|
Step 1 ADD TO CART |
Step 2 CHECKOUT Select payment method. |
Step 3 Confirm the order. |
|
|
We are in business since 2002 and do our best to give our customers perfect service!
|
john Liang | 2018-08-16 18:24:01 | I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.
The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.
I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.
On the scale of 10 I would probably give it a 11 and it is more than just good! | |  Debbie Pullinger | 2011-05-04 12:38:37 | OH my god !! After struggling to get the reset programme for my printer, I found 2manuals.com and had everything bought, recieved and printer reset in about 10 minutes. All for about £5.00. Thankyou so much !! | |  Tyler Thompson | 2016-12-02 22:26:06 | Thank You. I had just bought a new printer and Epson asked to update the firmware...unfortunately in the middle of the update my power shut off. I thought for sure I had deep sixed my brand new device. Even on the Epson website I could not find a manual firmware recover for my printer and OS version...others printers yes, but not this one. I found you website and thought I'd give it a try.
Horray, My printer is back working again. While I am not happy to have to pay someone else for something that Epson should have given for free, your price was with-in reason and your software was easy to use. | |  Evgen Test | 2010-08-31 09:40:59 | My printer stopped printing with the error as \"General Error\" Epson quoted me $60 to send an engineer to fix my printer.
After reading through the information on this site I decided to fix it myself.
Found the problem was related to the waste ink pad counter.
Only 10 minutes, I had the the printer working. The printer tested fine and has done approx 150 pages since with NO issues.
Thanks for the WIC program! | |  koosje rem | 2011-10-15 06:36:25 | thank you so much 2manuals for the reset key and assistance, i'm a baby boomer but i found it easy to do and am so glad i saved a printer, first time i have ever done this and hey i did it, thanks heaps. | |  michael thomas | 2016-02-20 23:16:31 | Guy gave me an printer Epson Pro 4900.
The printhead was completely clogged.
Used your adjustment program initial ink charge and got an immediate 100% clear nozzle check.
Wish everything was this easy...Thanks | |
|