Ink pads are at the end of their service life
Download WIC Reset Utility - Free
Get Reset Keys or Firmware Keys here!

Click to enlarge

S520, S750, S820, S900 printers Service Manual

TABLE OF CONTENTS

Part 1: PRODUCT SPECIFICATIONS (S900)
1. PRODUCT OVERVIEW
1.1 Product Overview
1.2 Special Features

2. SPECIFICATIONS
2.1 Printer Specifications
2.1.1 Printer specifications
2.1.2 Printer service life
2.1.3 Print head service life
2.2 Paper Specifications
2.2.1 Paper sizes and weights
2.2.2 Paper types and settings
2.2.3 Printable area
2.3 Print Head Specifications
2.4 Printer and Scanner Drivers

3. PRODUCT CODE LIST (S820)
1. PRODUCT OVERVIEW
1.1 Product Overview
1.2 Special Features
2. SPECIFICATIONS
2.1 Printer Specifications
2.1.1 Printer specifications
2.1.2 Printer service life
2.1.3 Print head service life
2.2 Paper Specifications
2.2.1 Paper sizes and weights
2.2.2 Paper types and settings
2.2.3 Printable area
2.3 Print Head Specifications
2.4 Printer and Scanner Drivers

3. PRODUCT CODE LIST (S750)
1. PRODUCT OVERVIEW
1.1 Product Overview
1.2 Special Features
2. SPECIFICATIONS
2.1 Printer Specifications
2.1.1 Printer specifications
2.1.2 Printer service life
2.1.3 Print head service life
2.2 Paper Specifications
2.2.1 Paper sizes and weights
2.2.2 Paper types and settings
2.2.3 Printable area
2.3 Print Head Specifications
2.4 Printer and Scanner Drivers

3. PRODUCT CODE LIST (S520)
1. PRODUCT OVERVIEW
1.1 Product Overview
1.2 Special Features
2. SPECIFICATIONS
2.1 Printer Specifications
2.1.1 Printer specifications
2.1.2 Printer service life
2.1.3 Print head service life
2.2 Paper Specifications
2.2.1 Paper sizes and weights
2.2.2 Paper types and settings
2.2.3 Printable area
2.3 Print Head Specifications
2.4 Printer and Scanner Drivers
3. PRODUCT CODE LIST
Part 2: TROUBLESHOOTING
1. PRINTER OPERATION
1.1 Printer Operation
1.2 Status Indicator
1.3 Simple Printer Operations
1.3.1 Cleaning operation
1.3.2 Printing the nozzle check pattern
1.3.3 Roller cleaning operation
2. SERVICING
2.1 Before Troubleshooting
2.2 Detectable Problems from System Start to Exit
2.3 Troubleshooting Problems
2.4 Troubleshooting Error Indications
3. DISASSEMBLY AND REASSEMBLY
3.1 Cautions for Disassembly and Reassembly
3.1.1 Cautions against ink stains (ink path/ink mist)
3.1.2 Damage due to static electricity
3.1.3 Deformation of spur tips
3.2 Exploded View
3.3 Disassembly and Reassembly
3.3.1 Carriage lock release
3.3.2 Removing and installing tap screws
3.3.3 Installing and removing the timing slit strip
3.3.4 Handling the encoder film
3.3.5 Removing and installing the logic board
3.3.6 Removal of red screws prohibited
3.3.7 Installing the logic board cover
3.3.8 Installing the control ROM cover
4. ADJUSTMENTS AND SETTINGS AFTER DISASSEMBLY AND
REASSEMBLY, AND CONFIRMATION OF OPERATION
4.1 Adjustments and Settings after Disassembly and Reassembly
4.1.1 Items for adjustment (per necessity/locations/tools)
4.1.2 If EEPROM settings adjustment is necessary
4.1.3 Print head position adjustment
4.1.4 Print head seam stripe adjustment (S750)
4.1.5 Grease Application
4.2 Confirmation method
5. TRANSPORTING THE PRINTER
5.1 Procedure
6. PARTS REPLACEMENT, PERIODIC INSPECTIONS, & TOOLS
6.1 Periodic Parts Replacement
6.2 Periodic Inspections
6.3 Tool List
7. SERVICE-RELATED FEATURES
7.1 Service Mode Operations
7.2 Test Printout
7.3 Printing the EEPROM Information
7.4 Resetting the EEPROM
7.5 Waste Ink counter settings (S900/S820)

Part 3: TECHNICAL REFERENCE
1. NEW TECHNOLOGY
1.1 Borderless printing
1.1.1 Borderless printing limitations
1.2 Quiet Mode
1.2.1 Quiet mode limitations
1.3 Remaining-ink amount detection (S900/S820)
1.3.1 Limitations when using the remaining-ink amount detection function

2. CLEANING MODES AND INK PURGE AMOUNTS
3. PRINT MODES

Part 4: APPENDIX
(S900)
1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS
1.1 Logic Board
1.2 Carriage Board
1.3 Print Head

(S820)
1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS
1.1 Logic Board
1.2 Carriage Board
1.3 Print Head

(S750)
1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS
1.1 Logic Board
1.2 Carriage Board
1.3 Print Head

(S520)
1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS
1.1 Logic Board
1.2 Carriage Board
1.3 Print Head
2.PROBLEMS LEFT REMAINING

IV
III. ILLUSTRATION INDEX
Page Part 1: PRODUCT SPECIFICATIONS
(S900)
Figure 1 - 1 Printer Exterior (S900)
Figure 1 - 2 JEIDA Standard Pattern
Figure 1 - 3 JIS SCID No. 5
Figure 1 - 4 Printable Area
(S820)
Figure 1 - 5 Printer Exterior (S820)
Figure 1 - 6 Printable Area
(S750)
Figure 1 - 7 Printer Exterior (S750)
Figure 1 - 8 Printable Area
(S520)
Figure 1 - 9 Printer Exterior (S520)

Part 2: TROUBLESHOOTING
Figure 2 - 1 Operation Panel
Figure 2 - 2 Nozzle Check Pattern Printout
Figure 2 - 3 Exploded View
Figure 2 - 4 Carriage Lock Release
Figure 2 - 5 Timing Slit Strip
Figure 2 - 6 Short-Circuiting the Capacitors
Figure 2 - 7 Do not Remove the Red Screws
Figure 2 - 8 Installing the Logic Board Cover
Figure 2 - 9 Installing the ROM Cover
Figure 2 -10 Print Position Alignment Pattern
Figure 2 -11 Seam Stripe Adjustment Pattern
Figure 2 -12 Grease application
Figure 2 -13 Service/Factory Test Printout (Sample)
Figure 2 -14 EEPROM Information Printout (Sample)

Part 3: TECHNICAL REFERENCE
Figure 3 - 1 Remaining Ink amount detection

Part 4: APPENDIX
(S900)
Figure 4 - 1 Logic Board
Figure 4 - 2 Carriage Board
Figure 4 - 3 Print Head
(S820)
Figure 4 - 4 Logic Board
Figure 4 - 5 Carriage Board
Figure 4 - 6 Print Head
(S750)
Figure 4 - 7 Logic Board
Figure 4 - 8 Carriage Board
Figure 4 - 9 Print Head
(S520)
Figure 4 -10 Logic Board
Figure 4 -11 Carriage Board
Figure 4 -12 Print Head

IV. TABLE INDEX
Part 1: PRODUCT SPECIFICATIONS
(S900)
Table 1 - 1 PRODUCT CODE LIST
(S820)
Table 1 - 2 PRODUCT CODE LIST
(S750)
Table 1 - 3 PRODUCT CODE LIST
(S520)
Table 1 - 4 PRODUCT CODE LIST

Part 2: TROUBLESHOOTING
Table 2 - 1 ERROR INDICATIONS
Table 2 - 2 EEPROM SETTINGS WHEN REPLACING THE INK ABSORBER

Part 3: TECHNICAL REFERENCE
Table 3 - 1 CLEANING MODES
Table 3 - 2 PRINT MODES

FORMAT: High resolution PDF document!
ZIP archive: 1 630 kB