Ink pads are at the end of their service life
Download WIC Reset Utility - Free
Get Reset Keys or Firmware Keys here!

Click to enlarge

BJC-8200, BJC-8200 Photo printers Service Manual

TABLE OF CONTENTS

Part I: PRODUCT SPECIFICATIONS
1. PRODUCT OUTLINE
1.1 Product Outline
1.2 Features
2. SPECIFICATIONS
2.1 Main Unit Specifications
2.1.1 Main unit specifications
2.1.2 Product life
2.2 Paper Specifications
2.2.1 Paper sizes
2.2.2 Paper measurement
2.2.3 Printable area
2.3 BJ Cartridge
2.4 Interface Specifications
2.4.1 Parallel interface
2.4.2 Serial (USB) interface
2.5 Printer Driver
2.6 Scanner Cartridge IS-52 (Optional)
3. NAMES OF PARTS AND THEIR FUNCTIONS
3.1 Names of Parts and Their Functions

Part II: MAINTENANCE
1. PERIODICAL REPLACEMENT/MAINTENANCE
1.1 Parts for Periodic Replacement
1.2 List of Periodic Maintenance
2. DISASSEMBLY AND REASSEMBLY
2.1 List of Tools
2.2 Operation Precautions
2.2.1 Ink paths
2.2.2 Ink mist
2.2.3 Precautions for damage due to static electricity
2.2.4 Precautions for transporting the printer
2.2.5 Precautions on spur tip deformation
2.3 Precautions for Disassembling and Reassembling the Printer
2.3.1 Unlocking the carriage
2.3.2 Removing/installing self tap screws
2.3.3 Adjustable bushings supporting the carriage shaft
2.3.4 Feed gear
2.4 Grease Application
2.5 Adjustment/Setting Procedures
2.5.1 Adjustments (Timing, adjustment, time, tool)
2.5.2 Cleaning the pick-up roller
2.5.3 Print head position adjustment
2.5.4 Setting the EEPROM
3. OPERATION CHECK AFTER DISASSEMBLING/REASSEMBLING
3.1 Confirmation Methods
4. TRANSPORTING THE PRINTER
4.1 Transporting the Printer

Part III: OPERATION
1. FUNCTIONS RELATED TO PRINTER OPERATION
1.1 Error Display
1.2 Descriptions of Error Indications
1.3 BJ Status Monitor
1.3.1 Main functions of the BJ status monitor
1.3.2 Items displayed on the BJ status monitor
1.4 Function Settings
1.4.1 Function settings using the printer driver
1.5 Off-line Operation
1.5.1 Cleaning operation
1.5.2 Nozzle check pattern printing
1.5.3 Replacing the cartridge/ink tank
2. SERVICE MODE
2.1 Service Mode Operations
2.2 Service Test Print
2.3 Printing EEPROM Information
2.4 Resetting the EEPROM
2.5 Setting the Waste Ink Counter
2.6 Setting the Model
2.7 Adjusting the Head Position
2.8 Roller Cleaning

Part IV: TROUBLESHOOTING
1. TROUBLESHOOTING BY DISPLAYED ERRORS
1.1 Initial Flowchart
1.2 Error List (Indicator/Beeper/Error Code)
1.3 Troubleshooting by Errors
2. TROUBLESHOOTING BY SYMPTOMS
2.1 Troubleshooting by Symptoms

Part V: REFERENCE
1. TECHNICAL REFERENCE
1.1 Functions of the Paper Feed Unit
1.2 Carriage Function
1.3 Purge Unit Functions
1.4 BJ Cartridge
1.5 Detection With Sensors
2. CONNECTOR POSITIONS AND PIN ASSIGNMENT
2.1 Logic Board
2.2 Carriage Board
2.3 BJ Cartridge
2.4 Scanner Cartridge
2.5 AC Adapter
2.6 DC Power Cable
2.7 Carriage Motor
2.8 Paper Feed Motor
2.9 Purge Motor
2.10 Ink Sensor
2.11 Paper Thickness Sensor
2.12 Purge Sensor
3. CIRCUIT DIAGRAM
3.1 Parts Layout
3.1.1 Logic board
3.1.2 Carriage board
3.2 Circuit Diagrams

FORMAT: High resolution PDF document!
ZIP archive: 2 949 kB