Click to enlarge

This Service Manual and Parts Catalog describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of the printer.

This manual consists of 6 chapters and Appendix.

CHAPTER 1. PRODUCT DESCRIPTIONS
Provides a general overview and specifications of the product.

CHAPTER 2. OPERATION PRINCIPLES
Describes the theory of electrical and mechanical operations of the product.

CHAPTER 3. TROUBLESHOOTING
Describes the step-by-step procedures for the troubleshooting.

CHAPTER 4. DISASSEMBLY / ASSEMBLY
Describes the step-by-step procedures for disassembling and assembling the product.

CHAPTER 5. ADJUSTMENT
Provides Epson-approved methods for adjustment.

CHAPTER 6. MAINTENANCE
Provides preventive maintenance procedures and the lists of Epson-approved lubricants and adhesives required for servicing the product.

APPENDIX Provides the following additional information for reference:
• Electrical circuit boards schematics
• Parts List

FORMAT: High resolution PDF document!

Zip archive: 5 659 kB

I want to:	Download on-line

Any questions about this product?

SEND US REQUEST by filling the form below.

E-mail


Comment (not required)

Send

	Step 1 ADD TO CART	Step 2 CHECKOUT Select payment method.	Step 3 Confirm the order.
We are in business since 2002 and do our best to give our customers perfect service!

dinesh kumar

2011-01-20 15:01:18

Went to town and bought a cable. Printer status is now restored. Thank you. I\'m not the most computer tech person which added to the confusion. I do suspect there maybe a few others like myself that you could lessen some confussion by including a note that says \"if your printer is connected by wifi it will be necessary to use a USB cable during the hack\". Thank you again for the program. It made me both mad and sick to think that after so little use of this printer that I was going to have to throw it out. Gratefully yours, Dinesh Kumar

john Liang

2018-08-16 18:24:01

I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers. The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged. At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that. The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking. I have to say without this software my $140 purchase would probably end up in the rubbish dump. I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer. On the scale of 10 I would probably give it a 11 and it is more than just good!

gökhan semizer	2010-12-03 23:40:12
Thank you! My Artisan 810 now working.

WILSON ALVARADO	2012-11-28 23:44:16
EPSON TX133 KEY PARA RESET DE PRINT URGENTE, PARA ASI PODER TRABAJAR Y BRINDAR SERVICIOS A MIS CLIENTES

Boris Salnikov

2025-11-08 23:16:00

Dear Sirs, my priter is Epson ET-2820. The reset of waste counter is not possible, but the printer is available in the list of printers. All stepst will be executed acc. to you specification. Isuue is: Querry has been rejected by the device. -Current devis specification are brocen, incorrect or out of date. - Please try to update this application to the most recent version first. - Otherwise, plese report all available information about this issue to us. The current firmaware is XP26P8 26/08/2025 Could you please check this info and sen me your response Thank you in advance BR Boris Salnikov

sundar sundar	2014-05-16 09:19:25
I just downloaded and tried your WIC Reset Utility. Since I am running Windows 8.1 I was afraid that it might not work too well. I was WRONG!! Happily it works GREAT on Windows 8.1! I\'m a happy camper!! Just thought I should let you know!! Best regards, sundar