|
 |
 |
perfeeeeeeeeeeeeeeeeeeeeeeeeeecccccccccccccccccttttttttttttt-
tttttttttttttttttt
Rating:  |
|
|
|
|
|
|
|
This thing works. I am very happy my printer is working again.
Rating: |
|
|
|
|
|
|
|
i couldn't print my work, but i found wic reset and keep my job, thanks from Mexico city.
Rating: |
|
|
|
|
|
|
 |
The license.exe utility doesn't recognize the printer XP-441.
Answer: Change USB Cable
Rating:  |
|
|
|
|
|
|
|
I love printing hard copies of material to review. I bought an Epson EcoTank 2650 for the single purpose of never having to worry about how much I have to print.
When I found out about the ink pad and how it basically “fills up” and prevents you from printing, I was pretty pissed off.
I called a service center in my state in the US and they wanted $110 to replace the ink pad and reset it. I searched hard for a solution and when I found this I was really sure this was a scam.
I tried it from one of your affiliates (octoinkjets) and did the trial to reset it to 90% and it worked.
Thank god you guys have this tool. I bought a key for $10 and was done with it. Watched a video on how to clean the ink pads and it was super easy. Now I have a new printer basically.
I can’t believe Epson gets away with this crap. You guys rock!
It really took a leap of faith to try this.
Rating: |
|
|
|
|
|
|
|
I had Epson WF-2650 and it wasn't printing fully, skipping lines, even though colors were full.
I did a lot of cleaning, head cleaning, put new cartridge but no luck. I did some head cleaning using glass cleaner and syringes as shown on various youtube video.
After that, my printer didn't recognize two of the cartridges. I tried everything, cleaning contacts etc, nothing worked.
I was finally going to buy new cartridges however stores were closed today so I decided to look for chip-resetting tool but nothing good was available locally.
I came across this WIC reset utility and was really skeptical if it will work. I took the chance, bought the key, used the tool to reset firmware to chipless firmware, it was successful at the first go.
At this point, printer showed all ink levels 100%. I printed a test page and it came out perfect.
To make it even more interesting for me, I live in Europe and during one of the trip, I bought two sets of XL cartridges for this same model but printer didn't recognize in the past and I was going to throw them since these were no good for my EU model. I tried these again after chip reset firmware and voila, they works too.
I am amazed at the propaganda of these printer manufactures that even original printer cartridges from US didn't work on the model here in EUROPE, these used to fit perfectly but printer wouldn't recognize however, now they works too.
Today, I was almost ready to trash my 2.5 yr old and not much used printer but after a lot of trying and finally using WIC reset utility, the printers works like new and saved me a lot!
These were the best 20 CHF/USD I spent today!
Thank you very much and I don't need to worry about relying on a hardware chip-reset tool. I will now be able to use US model cartridges and re-fill i like without having to worry. I even printed some photos using this same printer on photo paper today and printer did an excellent job.
Rating: |
|
|
|
|
|
|
|
Ich bin begeistert! Mit dem TRIAL Key konnte ich meinen Epson XP 750 wieder resetten und er funktioniert wieder. Vielen Dank, dass ich mir dadurch das Geld für einen neuen Drucker sparen konnte und ein Drucker weniger die Umwelt belastet.
War nur etwas anstrengend, die englischen Anweisungen zu lesen und zu übersetzen. Es wäre schön, wenn es diese Seite auch auf Deutsch gäbe.
Rating: |
|
|
|
|
Epson Stylus Pro Pro 7700, 7710, 7890, 7900, 7910, 9700, 9710, 9900, 9910, WT7900, WT7910, 9890, 9908, 7890, 7908, PXH10000, PXH8000 printers Service Manual, Parts List, Block Wiring Diagram and Exploded Diagram by latonna roberson
by latonna roberson 04/03/2019 |
Date Added: Wednesday, April 03, 2019 |
|
|
 |
My Epson 1400 got the end of life message and I had already reset it once before so I couldn't use the Epson site to reset it. I remembered this site from years ago and purchased the utility reset and it worked like a charm. Only wish I had not spent $400 on a new printer before remembering your site. Anyways I just did a live video showing that this really works on my youtube channel. More people need to know about this remedy!
Rating: |
|
|
|
|
|
|
|
Hello, excellent application. I dont have to buy a new printer:) Thank you very much
Rating: |
|
|
|
|
|
|
|
It worked! I recommend.I was affraid that was a kind of scam but is actually profissional service
Rating: |
|
|
|
|
|
|
|
Thank you! :) This actually works and its really helpful.
Rating: |
|
|
|
|
|
|
|
It works. Phew! If only I'd found this website earlier.
Rating: |
|
|
|
|
|
|
|
Worked hassle free with my Epson XP-55 .
I am very thankful that you provide the SW tool also for Linux as I have gone Microsoft-free at home.
It's cool that you provide a trial license to check out, whether the counter reset works in your setup (I admit I was sceptical). It worked for me and I immediatly ordered the full license.
The good thing is: as it is pure SW, it works also on weekends, when you need to print urgently and that stupid printer decided to not let you print any more!
Rating: |
|
|
|
|
|
|
 |
Thank you So Much! I really appreciate your reset utility!
Rating: |
|
|
|
|
|
|
 |
Hello there,
I am interested in buying a license key to make my WF-5620 chipless. Firmware upload is completed, I have fear I may have problems with your windows application and firewall. Do you offer support to make the License app work ?
Thank you, resetters !
===========
Yes sure
Rating: |
|
|
|
|
|
|
|
Used the WIC utility to reset the waste inked counter (after cleaning the pads). Worked perfect!
Printer is an Epson XP-710
Rating: |
|
|
|
|
|
|
 |
mera printer reset nhi ho rha isliye hum aapki service se naraz hai
=====Admin=====
This Adjustment Program is not for reset but for making adjustments and ink charging and power printhead cleaning to unclog printhead
Rating: |
|
|
|
|
|
|
|
I was skeptical in using this tool, but to my surprise and delight it worked like a charm using the serial key (trial) for a quick 10%reset of my Epson Artisan 830. Yes, meaning that if you don't buy the key, it will only reset your printer 10% of the way. My counters are now at 89.99% and 90.00%. It states these counters will reach maximum soon. I only wanted to use the fax option of this printer since I bought a new printer with fill tanks that hasn't arrived yet. This product worked perfectly. I wish I knew about it this software tool before buying a new printer......
Rating: |
|
|
|
|
|
|
 |
Thank you worked ok
Rating: |
|
|
|
|
|
|
|
Double thanks John,
I now have a working printer. It was so quick and easy I thought it hadn't done anything, then I tried it...
Best regards,
Richard
Rating: |
|
|
|
|
|
|
|
It works perfect to disable the ink level on EP WF-5190. Thanks.
Rating: |
|
|
|
|
|
|
|
This fixed my Epson R2400 printer! Whew! Thank you!
Rating: |
|
|
|
|
|
|
|
Thank you for this wonderful program. First i cleaned my epson internal. I hope it wil do it right for a long time again. I recommend this to other epson users. THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
Rating: |
|
|
|
|
|
|
 |
I have searched for this SL-D700 Adjustment Program for few years - couldnt find nowhere.
Now I get license for this program and reset driver counter. Thank you so much!!!!!!
Rating: |
|
|
|
|
|
|
|
I took a gamble last week by buying a Epson Pro 4900 for less than $140 thinking if I could not get it going, I can at least take the remaining ink out of the cartridge and use it on my other printers.
The initial nozzle test was not so bad for a printer that was unused for about 1 year, I got six Nozzles firing at around 90% not bad, the next thing I did was the popular Windex treatment, I ran 4 sessions of Windex treatment on the printhead, first one lasted 1 hour, second one lasted 2 hours and third one lasted 4 hours and the last one lasted 8 hours, I got a fully soaked paper towel in my last two treatments, I ran a series of power clean on the non firing nozzles but the Green nozzle remain clogged.
At this stage I thought this program may be my last chance to rescue this printer. I bought the program at 6 pm today, I ran the CL1 clean on OR/GR channel and the green nozzle remain clogged, I then ran the CL2 clean on the same nozzles and the same result, at this point I thought maybe this printer is completely dead but I will give CL3 a shot, I went for dinner when CL3 clean was performed on the printer. I came back immediately printed the nozzle check I got the perfect Nozzle pattern on almost every single colour nozzle except Cyan which has a few bar missing, a quick CL1 clean on Cyan/Magenta fix that.
The next thing I did was to run a quick paper profile on this printer with X-rite software, I printed two test pattern page to calibrate the printer, then come the first real print on my Epson Stylus Pro 4900 it was absolutely brilliant, the best printer I have ever own and the IQ on one of the cheapest glossy media I could find was simply breath taking.
I have to say without this software my $140 purchase would probably end up in the rubbish dump.
I must say I was skeptical about the truthfulness of the success that other has with this software but with myself actually tried this software, I have no reservation but to recommend that anyone who has a clogged Epson Pro 4900 to give this program a shot it may just save your printer.
On the scale of 10 I would probably give it a 11 and it is more than just good!
Rating: |
|
|
|
|
|
|
|
The 5 star tool. Very useful & helpful. Thanks team for developing this tool.
Rating: |
|
|
|
|
|
|
|
Thanks for this amazing software! This really helped me in my issue with Epson L200 Printer.
More powers to the devs of this software.
Rating: |
|
|
|
|
|
|
 |
HI, pls. send me your email to this email address jeromecuenca1989@gmail.com
I purchased 25 keys from your websete but i cant use it because according to your instructions i need to send my id to your email so that you can make a license for my product. Pls. help. Thank you!
Rating: |
|
|
|
|
|
|
 |
"A printer's ink pad is at the end of its service life" - Great! It worked! Thank you very much
Rating: |
|
|
|
|
|
|
|
Dear ladies and gentlemen,
I would like to thank you for your effort, it worked and the help
was great. As a result, we have the throw-away society a trick
beaten. Soooo I imagine help me
Thank you
Rating: |
|
|
|
|
|
|
|
Dear support-team,
I´m very glad that all went so well.
I want to thank you for all the detailed information you left
with the package as well as the helpful information by your internet support.
If ever required I will gladly give my experiences to my fellow colleges.
Thank you again and best wishes from Germany.
S. Ruhe
Rating: |
|
|
|
|
|
|
|
Your printers are pieces of shit, I'm sure that HP will be happy to know they have even more customers. The firmware is a piece of shit, the software isn't good either. And as for the support team, well lets just say that their not even worth anything, as any complications I have had(and others) haven't had any help from them. So you can thank yourselves for the loss, and give a big round of applause to any companies your in competition with.
Rating:  |
|
|
|
|
|
|
 |
I made the mistake of upgrading the firmware in my Epson XP-434. That caused my ink cartridges to not be recognized. I found this WIC Reset Utility after after searching for original firmware version.
I bought the key and plugged it into the utility, and bingo 10 minutes later I was up and running.
Thanks a bunch 2manuals.com!
Rating: |
|
|
|
|
|
|
|
I just used this utility on an Epson XP 810. Worked like magic. First the trial version,this brought my printer back to life immediately. Then i bought the reset key, and according to the program, the waste counter is now set to zero. I replaced the inkpads with thightly packed adsorbent paper, so for less than ten dollars I have a fully working printer /scanner/copier again.
Thanks!
Chris
Rating: |
|
|
|
|
|
|
|
Thank you so much.
Your Product is Amazing and your Service Fantastic!
Keep doing what you are doing, yours is the standard that others should be measured by.
I really cannot say enough....so Professional and thank you to Lisa.
If you have any further questions or concerns please do not hesitate to contact me.
Regards, Robert Dogrusever
Rating: |
|
|
|
|
|
|
|
The Epson PP-100 should be supported (it is in your list), but in the WIC Reset Utility v.5.0.40 program the printer is not supported in the 'Control' button. What am I doing wrong ?
Rating: |
|
|
|
|
|
|
|
I bought refillable cartridges for the Epson XP-241 on AliExpress and did not work.
The reason: Epson XP-241 manufactured in the Philippines. I was desperate.
The solution: CHIPLESS.
You've saved my XP-241 printer. Thank you very much.
Rating: |
|
|
|
|
|
|
|
Excellent service, my printer is back to printing. You are the best.
Rating: |
|
|
|
|
|
|
|
The procedure was easy. I used the trial version, and my printer is now working. I will buy the reset key next time. I recommend this fix. Thank you....
Rating: |
|
|
|
|
|
|
|
Very practical and safe program, total guarantee.
He used it several times
Rating: |
|
|
|
|
|
|
|
LIFE SAVER! This program help me solve all the problem for my printer.
I Love all of you developers!
Rating: |
|
|
|
|
|
|
|
Wow, It's amazing, I can use my canon g2000 again! Thank you!
Rating: |
|
|
|
|
|
|
|
very good i like it i am so happy i realy like it it is very usefull i support it software
Rating: |
|
|
|
|
|
|
|
Nevermind. Did more research and to resolve the error, aside the firmware downgrade, I removed the ink, unplugged the printer, turned the printer back on, and placed the Ink's in individually pressing done after each ink. Doing this I was able to get it back up and running again. Thanks!
Rating: |
|
|
|
|
|
|
|
IT WORKED!!!!! I just wanted to say THANK YOU SO MUCH!!!!! WOW. Smarties like the ones that started/involved in this company is what makes life a little easier. Thank you SO MUCH once again!!!!
VERY Sincerely,Marissa Smith
Rating: |
|
|
|
|
|
|
 |
Dear Sir,
I need this Service Manual for D3000 and i couldn't fine away how to add this to my shopping card.
please Advice.
Rating: |
|
|
|
|
|
|
|
Wow, what a program, it just reset my Epson WF 7525 with inkpad problem.
Thank you!
Max
Rating: |
|
|
|
|
|
|
|
Epson has a new printer.
XP-15000.
It would be good if we could reset the waste ink for it.
Rating: |
|
|
|
|
|
|
|
Epson B500DN not working. i did buy reset key. Please help me.
B500 is not supported by WIC - please check
Rating: |
|
|
|
|
|
|
 |
i buy for lx-300+ but downlod a lq-300+ so what can i do now??????
Check you email now
Rating:  |
|
|
|
|
| Displaying 251 to 300 (of 824 reviews) |
Result Pages: 6 |
|
|
Total customers: 403975
Customers online: 34
